Hydraulic tubing anchors have been around for over 30 years, however the technology has greatly improved in recent years. To better understand the dynamics of hydraulic anchors, a test rig was constructed to approximate downhole conditions in terms of depth and holding capacity. The test assembly allows for controlling the perceived depth by way of pressurizing the tubing, or internal bore of the hydraulic anchor. Varying the pressure in the "tubing" simulates the pressures seen at any depth. The holding capacity of the anchor is tested by a hydraulic jack placed under the anchor. The jack, having know bore can easily correlate PSI to lifting force placed on the eh anchor. Numerous tests were conducted at varying depths to find the lifting force required to dislodge, or cause the anchor to slip. Anchor test data as well as analysis of the interface between the anchor and casing will be presented.
Presenters
Walter Phillips and Andrew Tillison
Black Gold Pump and Supply