Paper: REMEDIATION OF PRODUCTION LOSS DUE TO PROPPANT FLOWBACK THROUGH COILED-TUBING INTERVENTION AND CASE STUDY

This presentation discusses the results of experimental and field case studies of a remedial treatment technique designed to eliminate fracture proppant production. This process uses a low-viscosity consolidating agent, which is placed into the propped fractures via coiled tubing or conventional tubing coupled with a pressure-pulsing tool. The treatment fluids are designed to provide consolidation for previously placed proppant near the wellbore without damaging the permeability of the proppant pack. The consolidation treatment transforms the loosely packed proppant in the fractures and the formation sand close to the wellbore into a cohesive, consolidated, yet highly permeable pack. Laboratory gas flow testing indicates that the proppant pack in a fracture model under closure stress required low-strength bonds between proppant grains to withstand high production flow rates. Field case histories are presented to discuss treatment procedures, precautions, and recommendations for implementing the treatment process. One major advantage of this new remedial treatment technique is the ability to place the treatment fluid into the propped fractures, regardless of the number of perforation intervals and their lengths, without mechanical isolation between the intervals. The fluid placement efficiency of this process makes remediation economically feasible, especially in wells with marginally economic reserves.